Bharat Rays logoBharat Rays
Get a quote

X-ray machines · line frequency

300 & 500 mA X-ray machines

Column · table · console


The larger line-frequency sets, for an X-ray department: a tube on a vertical column over a radiography table, worked from a separate console. The 300 mA is rated 300 mA at 125 kVp, 24 kW, with a rotating-anode tube, and runs on 440 V.

Bharat Rays 300 mA set: tube on a vertical column over a glass-top table.Bharat Rays 300 mA control console with four knobs and two meters.
Move over the machine to see it in X-ray
300 mA
125 kVp, 24 kW
Tube
Rotating anode
Stand
Fixed, ceiling-free
Supply
440 V

300 mA specification

Copied from the printed Bharat Rays 300 mA sheet.

300 mALine frequency
Radiography rating300 mA, 125 kVp
Output24 kW
RectificationFull-wave rectified
Timer0.06 to 5 s
DisplayDigital display
X-ray tubeRotating anode
Power supply440 V
ProtectionElectronic overload protection
Tube standFixed and ceiling-free
Download the 300 mA specification sheet (PDF, 0.6 MB). The 500 mA has no printed sheet on this site: ask for its specification with your quote.

The set

Shown: the 300 mA, from a site photograph.

Bharat Rays 300 mA set: tube on a vertical column over a glass-top table.

300 mA

Column and table

Format
Column, table and console
Rating
300 mA, 125 kVp, 24 kW
Tube stand
Fixed and ceiling-free

Get a quote

Bharat Rays 300 mA control console with four knobs and two meters.

The console

300 mA control

Display
Digital display
Timer
0.06 to 5 s
Protection
Electronic overload protection

Get a quote

Questions buyers ask

Short, plain answers. Anything else: call 1800 309 9729, toll free.

What does a 300 or 500 mA X-ray room need?

A 440 V supply (the 300 mA sheet specifies 440 V), space for the column, table and console, and a room built to AERB's layout and shielding guidelines, with a protective barrier for the operator and a lead-lined door. See radiation protection and ask us to check your room plan.

What is the difference between line-frequency (LF) and high-frequency (HF) X-ray machines?

A line-frequency generator works its high-voltage transformer at the mains frequency (50 Hz in India) and rectifies the output, so the tube voltage rises and falls with each mains cycle. A high-frequency generator first converts the mains into a much higher frequency, which gives a nearly steady tube voltage from a smaller transformer and more consistent exposures. In the Bharat Rays range the 10 mA portable and the 100, 300 and 500 mA sets are line frequency; the 2 mA handheld, the 5 mA portable and the 5 to 40 kW machines are high frequency.

Do you need an AERB licence to use an X-ray machine in India?

Yes. The Atomic Energy Regulatory Board (AERB) requires every user of medical diagnostic X-ray equipment to hold a licence for operation, applied for through its e-LORA portal. The equipment must be type-approved and bought from an authorised supplier, and the room must follow AERB's layout and shielding guidelines. See AERB's e-LORA guidelines for diagnostic radiology, and ask us about the model you are buying.

Get a quote

Toll free
1800 309 9729
Phone
+91 88102 21120
WhatsApp
Message +91 84487 41120
Email
info@waymedhealth.com
Address
B-47, Sector 6, Noida, Uttar Pradesh 201301

Goes straight to our sales team. We use these details only to reply to you. Privacy.